ARC Raiders: how to find the old EMP trap in the Straight Record quest

A player locating the old EMP trap on a ridge in ARC Raiders

How to find the old EMP trap in ARC Raiders

The Straight Record quest in ARC Raiders asks you to shut down a malfunctioning electromagnetic pulse device that is interfering with raider communications, and the objective reads exactly as a navigation problem: find the old EMP trap, solve a small environmental puzzle, then extract. Most players get stuck not because the device is hidden in a secret room, but because the surrounding area, Victory Ridge, is easy to miss on the map and the puzzle that follows punishes a rushed approach. This guide walks through the route to the trap, the three power switches you have to disable, and the order that prevents a forced reset.

Straight Record is one of the cleaner examples of how ARC Raiders blends map knowledge, light puzzle logic, and extraction-focused pacing, so solving it cleanly also teaches you how to read other side quests in the Dam Battlegrounds region.

Quest context and why the trap matters

Straight Record is built around a single tactical idea: raider comms are being jammed, and the source is an old EMP trap left running on a ridge. The mechanical hook is the puzzle sequence attached to the trap, but the design intent is to push the player off the obvious paths and into terrain that does not always announce itself on the default map view.

A few details that frame the rest of the walkthrough:

  • The quest is exploration-heavy rather than combat-heavy, so success depends more on route choice than firepower.
  • The objective marker only appears once the quest is active, which can hide Victory Ridge from players who scout the area before picking the mission up.
  • The puzzle attached to the trap is gated by switch order, not by a timer, so scouting is more valuable than rushing.
  • Failure states are recoverable: a wrong switch sequence sends you back to the pole, not back to the quest giver.

Understanding the design intent helps because it tells you what the quest is testing. It is not testing your ability to win a firefight, it is testing whether you can read the map, follow a subtle environmental cue, and execute a small sequence correctly.

Where Victory Ridge sits inside the Dam Battlegrounds

Victory Ridge is the local name for the high ground between the West Broken Bridge and Ruby Residence inside the Dam Battlegrounds region. It is the named area you need to reach, and the old EMP trap sits on the ridge itself, not in a building below it.

Two things make the area confusing on a first pass:

  • Victory Ridge does not appear at the default map zoom level. You have to zoom in at least one extra level before the label becomes readable.
  • If the quest is active, the in-game marker can route you there directly, but the marker only stays useful while the quest is the active tracked objective.

The reliable approach is to combine both signals. Zoom in on the map, confirm the ridge sits between the West Broken Bridge and Ruby Residence, then track the quest marker once you are on the ground. Manual navigation works as long as you keep to elevated terrain and ridgelines, because Victory Ridge lives up to its name and sits a little higher than the surrounding ground.

Route planning before you leave Speranza

Because Straight Record is exploration-led, your loadout matters more than usual. Heavy combat builds are overkill for the puzzle, and they slow you down on the ridgeline approach. A lighter setup keeps your stamina and movement responsive, which is what the quest actually rewards.

Loadout choice Why it helps on this quest Trade-off to consider
Lightweight armor with high mobility Faster traversal across broken bridges and ridgelines Lower survivability if a patrol finds you
Mid-range optic and sidearm Enough reach to spot distant contacts without weighing you down Limited close-range stopping power
Minimal inventory, no high-value loot carried in You can extract immediately after the trap shuts down You miss out on incidental loot along the route
One stamina or healing consumable Recovers from an accidental fall or unexpected firefight Consumes a slot you could use for crafting parts

None of this is required by the quest, but each choice removes a small risk. The objective marker does the routing for you once it is active, so the gameplay loop is closer to a guided scavenge than a combat mission.

Reaching Victory Ridge from the Dam Battlegrounds

The route from the nearest Dam Battlegrounds spawn is short but visually noisy, which is why players miss the entrance. Three landmarks frame the approach:

  1. From the West Broken Bridge, follow the broken roadway eastward and look for an upward slope rather than a doorway.
  2. Use the Ruby Residence complex as a back marker: the ridge sits above and slightly north of it, so aim for high ground rather than for the residence itself.
  3. Once elevation rises and the path becomes a single-file ridgeline, you are on Victory Ridge and the EMP trap is at the visible end of that spine.

The reason the quest is solvable without a marker is that the ridge has a clear silhouette against the rest of the region. If you are walking on flat ground surrounded by lower walls, you are still under the ridge and need to climb.

Identifying the old EMP trap itself

The old EMP trap is a single metal pole on the ridge, marked with electrical hardware at its base. Visually, it is a tall, narrow structure rather than a console or terminal, which helps separate it from regular interactive objects in the area.

Three behavioral rules apply once you are standing in front of it:

  • Interacting with the pole starts the puzzle sequence, so do not activate it until you have visually confirmed the locations of the three yellow switch boxes around the ridge.
  • If you activate the trap before you know where the switches are, you risk completing a partial sequence and having to walk back to the pole to reset.
  • The pole itself stays interactive through the entire puzzle, which is your reset point if anything goes wrong.

Treat the trap as the puzzle anchor rather than the puzzle itself. The real work happens at the three yellow electrical boxes around it.

The power switch puzzle: order, not timing

After you interact with the EMP trap, the quest wants you to disable three power switches in a specific order. Each switch is a small yellow electrical box scattered around the ridge, and the order matters more than the speed at which you hit them. There is no countdown, so slow, deliberate movement is the right play.

Switch Where to find it on the ridge Why players miss it
First switch Close to the EMP pole, on the same elevation Easy to find, but easy to ignore because it is visually unremarkable
Second switch Indoors on the ridge, accessed through a small upper floor The interior entrance is not obvious from the ground; many players walk past it
Third switch Down the slope, reached by following a fallen electrical cable across the road The cable is the only reliable cue, and the switch is not visible from the second switch

The sequence is enforced by the puzzle logic, not by player preference. Hitting the second switch first will not simply shuffle the order: the quest will mark the run as failed and ask you to return to the pole to restart. The fastest way to clear the puzzle is to scout the three positions first, memorize the cable path, then return to the pole and execute the route in order.

Reading the environmental cues around the ridge

ARC Raiders tends to use environmental storytelling rather than floating waypoints for puzzle objects, and Straight Record follows that pattern. Two cues are worth memorizing because they repeat across other quests in the region:

  • Fallen or stretched electrical cables are not random debris. Following a cable from one point to its source usually leads to an interactive objective, including switch boxes and console terminals.
  • Yellow coloration on electrical hardware consistently marks a switch or breaker that is part of a power puzzle. If a box is yellow and you are anywhere near a quest marker about power or comms, it is part of the sequence.

Internalizing those two patterns turns the ridge into a readable system instead of a confusing maze, and it saves time on later Dam Battlegrounds quests that use the same logic.

Common failure modes and how to recover from them

The puzzle is forgiving, but the area is not. Most failed runs come from the same handful of mistakes, and each one has a clean recovery path.

Failure mode What usually causes it How to recover
Puzzle reset after a wrong switch order Activating the second or third switch before the first Walk back to the EMP pole, interact with it again, and re-enter the sequence in order
Player cannot find the indoor switch Looking for a ground-floor entrance instead of an upper-floor access point Circle the structure at the ridge level, look for a small side entrance or stairwell leading up
Player cannot find the third switch Not noticing the fallen cable across the road Return to the second switch, locate the cable, and follow it to the yellow box at its source
Hostile patrol interrupts the puzzle Sprinting through the ridge instead of scouting Break line of sight, finish the puzzle if you are already mid-sequence, or retreat to the pole and restart

Every recovery path involves returning to the EMP pole, which is why the pole’s position matters more than the switches’. As long as you can reach the pole, the quest is recoverable.

Finishing the quest: trap shutdown and extraction

Once all three power switches are disabled in the correct order, return to the old EMP trap and interact with it again. The system will shut down completely and the quest will mark Straight Record as finished. From that point, the only remaining objective is extraction, which means heading back to Speranza with whatever you have picked up along the way.

Two practical notes for the extraction leg:

  1. Do not over-commit to looting the ridge after the trap shuts down. The quest is finished the moment the pole registers the shutdown, and any time you spend scavenging is time during which another squad can contest the extraction point.
  2. Carry a minimal inventory into the quest. The rewards you receive on turn-in are typically useful for mid-game weapon upgrades and crafting progression, so the design intent is to leave the ridge quickly rather than to use it as a farming run.

A clean extraction is the real win condition, because the quest rewards only land once you hand the objective in at Speranza.

How this quest fits the wider ARC Raiders design loop

Straight Record is a small quest with an outsized teaching value. ARC Raiders leans on a pattern where environmental storytelling, map literacy, and short puzzle sequences take the place of long combat encounters, and Straight Record is one of the cleanest introductions to that pattern. If you can clear this quest without resetting the puzzle, you are ready for the more layered environmental puzzles in later Dam Battlegrounds content.

A reliable breakdown of the Straight Record quest flow looks like this:

  • Pick up the quest, mark Victory Ridge on the map at a higher zoom level, and equip a lightweight loadout.
  • Approach the ridge from the West Broken Bridge side, using elevation and the Ruby Residence complex as back markers.
  • Locate the EMP pole, then scout the three yellow switch boxes before activating the trap.
  • Disable the switches in order, using the cable as the primary cue for the third box.
  • Return to the pole, shut the trap down, and extract without over-investing in incidental loot.

For players who want a curated reference that covers the same route and switch order, the ARC Raiders Straight Record quest guide for the Old EMP Trap at Victory Ridge lays out the same flow in a more checklist-style format.

Quick checklist for the Straight Record route

Use this list as a pre-run reference once you are familiar with the quest. It is not a substitute for the in-game markers, but it removes most of the guesswork on a second or third run.

  • Zoom in on the Dam Battlegrounds map until Victory Ridge is labeled.
  • Confirm the ridge sits between the West Broken Bridge and Ruby Residence.
  • Equip a lightweight armor set, a mid-range optic, and one healing consumable.
  • Approach from the West Broken Bridge and climb toward the ridgeline, not toward Ruby Residence.
  • Locate the EMP pole, then scout the three yellow switch boxes without interacting with the trap.
  • Note the indoor switch on the upper floor and the cable leading to the third switch downslope.
  • Return to the pole, activate the trap, and disable the switches in order: first near the pole, then indoor, then the cable-fed box.
  • Return to the pole, shut the trap down, and extract to Speranza without looting the ridge.

That sequence is the whole quest. Once you have run it once, the map reading and the cable cue carry you through it cleanly on subsequent runs, and you can start focusing on routing rather than survival.

Frequently asked questions

Where exactly is the old EMP trap in the Straight Record quest?

The old EMP trap is a metal pole on Victory Ridge, inside the Dam Battlegrounds region. Victory Ridge sits between the West Broken Bridge and Ruby Residence, and the trap is at the visible end of the ridgeline once you climb above the surrounding area.

Why does Victory Ridge not show up on the map at first?

Victory Ridge does not appear at the default map zoom level. You need to zoom in at least one extra level before the label becomes readable, or rely on the quest marker once the mission is active.

Do I have to fight enemies to find the old EMP trap?

No. Straight Record is exploration-led rather than combat-led, so the main challenge is navigation and the switch puzzle. Hostile encounters can still happen, but they are not the core mechanic.

What is the correct order for the three power switches?

The correct order is the switch closest to the EMP pole first, the indoor switch on the upper floor second, and the switch reached by following the fallen electrical cable downslope third. Activating them in any other order will reset the puzzle at the pole.

What happens if I activate the switches in the wrong order?

The puzzle fails and you must return to the EMP pole to restart the sequence. The quest does not reset you back to the quest giver, so the recovery is short as long as you can reach the pole.

Do I need to interact with the EMP trap before scouting the switches?

You can locate the switches first without activating the trap, and that is the recommended approach. Once you activate the pole, the puzzle becomes active and any wrong switch order forces a reset, so scouting before activation saves time.

Is there a timer on the switch puzzle?

No. The puzzle is gated by order, not by time, which means you can move deliberately between the switches. Rushing is what causes most resets, not slow play.

What rewards do I get for completing Straight Record?

On turn-in at Speranza, you receive rewards suited to mid-game weapon upgrades and crafting progression. The exact reward list is determined by your current progression, so treat the rewards as progression support rather than as a fixed loot table.

Can I loot the ridge after the trap shuts down?

You can, but the design intent is to extract quickly once the trap is offline. Lingering on the ridge adds risk from other squads and from patrols, and the quest rewards arrive only when you extract, not when you keep scavenging.

What should I do if another squad contests the ridge while I am mid-puzzle?

Break line of sight, finish the current switch if you are partway through the sequence, and reset at the pole if you lose progress. The recovery is short, so it is usually better to reset and clear the puzzle than to fight a squad while holding an active objective.

Categories:

Leave a Reply

Your email address will not be published. Required fields are marked *